Composition of riveting gun and operation of core riveting gun
Release：网站管理员
Browse：837Second
Time：2019/9/3 15:49:28
Core riveting gun is composed of handle, gun body, trigger and pipe joint, etc.
1. Core-pulling rivet gun is limited to the installation of core-pulling rivets, all operations shall be carried out according to the operation instructions;
2, can not overload the use of core riveting gun, in the specified range of performance parameters work;
3, do not put the rivet into the need to rivet between materials, do not pull the trigger rivet, do not allow the head of the rivet gun on themselves or others;
4. During operation, ensure that the container of collecting mandrel is tightened and will not slide;
5, timely empty the collection mandrel container, so as not to damage the core riveting gun;
6. Do not use riveting gun as hand hammer;
7. Regularly check the connection and supply of compressed air;
8, early operation of the riveting gun to wear protective devices;
9. Ensure that the supply force of compressed air is within the specified range;
10, avoid serious collision or impact riveting gun;
Core pulling riveting gun use procedures
Install mandrel collector, select and change the screwdriver, install blind rivets, automatically suction blind rivets, clear mandrel collector;
Maintenance of core pulling riveting gun
After the use of the riveting gun, to lubricate the clamp, replace the clamp, re-injection of hydraulic oil, the riveting gun stored in a dry place;
Maintenance of riveting guns
The maintenance of the core riveting gun must be carried out by the professional trained technical maintenance workers.
